高压捕获翼构型的跨流域气动特性

高压捕获翼(HCW)构型是一种满足高速飞行器高容积、高升力、高升阻比的设计需求的新型气动布局.最近研究表明,HCW构型能够提高飞行器在连续流区的升力和升阻比,缓解飞行器设计中高容积率与高升阻比间的矛盾.为探究该气动布局在过渡流域(70～100 km)的气动特性,以一种楔—平板组合的高压捕获翼原理性构型作为模型,采用直接模拟Monte Carlo(DSMC)方法,详细分析了该模型在典型高超声速条件(马赫数20)下的流场结构和壁面气动力/热分布.结果表明,随着飞行高度增加,稀薄效应增强,机体压缩产生的激波厚度增加,激波边缘逐渐模糊,机体与捕获翼之间的开放通道内出现压力干扰.同时,高压捕获翼表面的摩擦系数迅速上升,气动摩擦成为制约捕获翼构型升阻比的重要因素.针对这一问题,分析了捕获翼材料表面的适应系数对飞行器的气动力/热的影响,结果表明,降低适应系数可以显著减小壁面摩擦和热流量,可通过选用适应系数较小的表面材料进一步提高该类飞行器气动性能.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

火星表面热环境对航天器热控影响分析

火星大气对太阳辐射产生吸收和散射作用，同时还将与火星表面航天器发生对流换热。热设计时难以直接评估对流、辐射和导热三种换热对航天器的影响，从而确定主要的控温途径。在调研火星表面辐射、大气等热环境的基础上，从线性化传热系数和对流辐射比的角度对比分析了辐射、对流和导热对航天器的影响。器表辐射传热系数随光学属性和温度的变化范围为0.3～1.4W/(m2·℃)，对流传热系数随风速变化为0.2～1.5W/(m2·℃)，器内导热传热系数可控制在0.25W/(m2·℃)以下。结果表明，太阳辐射较火星表面和天空辐射而言是主要外热源，航天器表面的辐射和对流换热为两条并联换热途径，两者均可成为主要换热途径，器内导热传热是控制航天器内外隔热的主要可控因素。     

飞机液压系统柱塞泵热分析

随着飞机液压系统向高压化、大功率化方向发展，液压系统的发热及温升问题受到了广泛关注。柱塞泵作为液压系统中重要的能量转换装置，对液压系统的功率损失和温度有重大的影响，良好的柱塞泵的热分析对液压系统的热设计和温度控制有重要的意义。然而传统的柱塞泵热分析方法，如平均油温法、软件仿真法和热节点网络法，因不够准确、高效和简洁而不能满足现代飞机液压系统热分析和热设计的相关需求。本文针对飞机液压系统柱塞泵发热的相关问题，采用基于集总参数的热网络分析方法，建立了柱塞泵热网络模型，通过对柱塞泵不同工况下的仿真，验证了模型的有效性和准确性，为柱塞泵及液压系统的热分析提供了参考。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

一种地理围栏内无人机航迹跟踪方法

针对UTM体制中无人机在地理围栏内的飞行监视问题,提出一种约束状态相关模态转换混合估计算法(CSDTHE)。采用随机线性混杂系统模型对无人机运动状态进行建模,利用CV、CT和CA三种模态描述无人机的飞行状态,以构建地理围栏内无人机运行的通用模态转换模型框架。利用飞行模态改变点(FMCP)定义相关模态转换参数,设计模态转换条件,生成模态转换概率矩阵,从而建立与状态相关的模态转换模型。运用约束卡尔曼滤波(CKF)方法对直线阶段和转弯阶段的无人机运动速度分别施加等式约束,并通过仿真实验验证了CSDTHE算法对无人机跟踪的有效性。     

雄安新区人才队伍建设思考

人才是实现民族振兴、赢得国际竞争优势的战略资源,雄安新区建设发展离不开人才的重要支撑。本文以雄安新区人才队伍建设为研究对象,剖析这一研究的意义和现状,探究雄安新区人才队伍建设存在的问题,最后提出解决这一问题的建议。